New Rowe AMI Mechanism Control Unit R80S R81 R82 R83 RI-2 CTI-1SC

New replacement Rowe AMI Mechanism Control Unit PCB for R80S, R81, R82, R83, RI-2 and CTI-1SC jukeboxes.

This newly manufactured board is a modern replacement for the electronics used in the original Rowe AMI 401-06905 Mechanism Control Unit.

Also commonly referred to as the Mechanism Control Board, Mechanism Control PCB or MCU, it is designed to replace an original unit that has failed, become unreliable or suffered damage from ageing components.

This is an outright replacement board, not an exchange service, so you do not need to send us your old Mechanism Control Unit.

Compatible Rowe AMI jukebox models

This replacement Mechanism Control Unit PCB is suitable for:

• Rowe AMI R80S
• Rowe AMI R81
• Rowe AMI R82
• Rowe AMI R83
• Rowe AMI RI-2
• Rowe AMI CTI-1SC

Rowe AMI Mechanism Control Unit part number

This replacement board is designed as a modern replacement for the electronics in the:

• 401-06905 — Rowe AMI Mechanism Control Unit

The 401-06905 Mechanism Control Unit was used across compatible jukeboxes in the R80S-R83 generation, including RI-2 and CTI-1SC.

If your jukebox uses a 401-06905 Mechanism Control Unit, this replacement PCB is designed for that application.

New replacement Mechanism Control PCB

Unlike a used original board, this is a newly manufactured replacement PCB assembled using new components.

Original Rowe AMI Mechanism Control Units are now several decades old and can suffer from component ageing, poor connections and intermittent or permanent electronic faults.

This replacement provides a modern alternative to repairing or sourcing another ageing original 401-06905 unit.

Mechanism control functions

The Mechanism Control Unit forms part of the electronic control system responsible for operating the jukebox record mechanism.

It works with the other jukebox control electronics during functions including magazine scanning and the record transfer cycle.

Because the Mechanism Control Unit works together with the Memory Unit, Selector Logic and mechanical components, a mechanism-related fault does not necessarily mean that the Mechanism Control Unit itself is faulty.

What you receive

You will receive a new replacement Mechanism Control Unit PCB designed for jukeboxes using the original Rowe AMI 401-06905 Mechanism Control Unit.

The replacement is supplied as a circuit board and does not include the original plastic or metal case.

It is designed to fit into your existing Mechanism Control Unit housing.

Two new insulating thermal pads are supplied so that your existing metal frame can be refitted correctly.

Each board is assembled and fully tested before dispatch.

Installation

The replacement PCB is designed to fit in place of the original Mechanism Control Unit electronics while retaining the existing housing and metal frame.

If you are unsure whether your jukebox uses the 401-06905 Mechanism Control Unit, or whether the Mechanism Control Unit is responsible for the fault, contact us before ordering.